Before & After Photos

This project focused on sealing and improving the crawl space while upgrading the overhang area. A full CleanSpace encapsulation system was installed and sealed along the bottom edge of the existing wall insulation to block moisture and improve air quality. A drainage mat was placed beneath the liner to manage ground seepage and create a durable, comfortable surface.

All wood surfaces were treated with a mould-control solution for added protection. In the overhang, old insulation was removed, the area was vacuumed and disinfected, and wire mesh was installed over any gaps or openings to help prevent rodent entry. The overhang was then re-insulated using SilverBoard rigid foam for better efficiency and long-term durability.

In this project, we focused on improving air quality, reducing moisture, and keeping the crawl space clean and well-protected. We installed a high-quality dehumidifier and air purifier to control humidity and filter the air, helping prevent mould and musty odours. All wood surfaces were treated to kill existing mould, and the crawl space was sealed with a durable liner and drainage matting to block ground moisture. We also wrapped the base of the piers for extra protection, cleaned the ducts and pipes, and removed any debris and cobwebs. With regular filter replacements and ongoing maintenance, this space will stay cleaner, healthier, and better protected for years to come.

We completed a window well improvement project to help with drainage and overall appearance. First, we removed the old window well materials and cleared away any excess soil and debris to create proper space below the window. We then added clean stone at the bottom to help water drain away properly.

Next, we built a new window well using treated wood and installed a drainage mat along the outside to help guide water away from the foundation. The top of the mat was neatly finished with a trim piece to keep everything secure and tidy. Once everything was in place, we used the original soil to backfill the area, leaving it clean and functional.

We installed a powerful water pump system to keep your crawl space dry. This system includes a pump, a protective liner, a water alarm, and a sturdy base. The pump is designed to remove any water that collects and sends it safely away through your plumbing.

We recently helped a homeowner completely refresh their crawl space, turning it from a damp, messy area into a clean, dry, and usable space.

The floor used to be bare dirt, so we started by adding a drainage system and a reliable sump pump to keep water out even during power outages, thanks to a battery backup. We also added ventilation to improve air quality and help control moisture.

To seal everything up, we installed a heavy-duty liner across the entire floor and walls, making the space feel much cleaner and more secure. Underneath that, we added a layer that helps with comfort and protects against ground moisture—perfect if they ever want to use the space for storage. We gave the area a deep clean, removed the old vapor barrier, got rid of spider webs, and treated the concrete for any lingering smells. We even wiped down the heating ducts and sewer lines. To make sure the crawl space stays warm and energy efficient, we added solid insulation to the walls and sealed everything tightly. We also checked for any small gaps or cracks and sealed them up with mesh to help keep pests out.

Since access was tricky, we created a custom hatch through a closet to make getting in and out easier in the future.

Now the crawl space is dry, insulated, and so much healthier, giving the homeowner peace of mind and a better home environment.