American Waterworks

A homeowner from Worthington, MN, was chatting with her neighbor one day when she learned that they had just had their home tested for radon gas. She didn't know much about the dangers of radon gas but figured it would be worth testing her home, just to be on the safe side. When the homeowner went to look for radon specialists in her area, she quickly found our website. She was impressed with other radon systems we had installed in her area and decided to sign up for her FREE estimate. Several weeks later, Ryan P, one of our Design Specialists, headed out to the home.  When Ryan arrived at the home, he began the process by placing a continuous radon monitoring test in the home and then carried on with his inspection of the home. When Ryan finished, he met with the homeowner. He began by explaining a bit more about what radon is. Radon is an invisible, odorless, colorless gas that is emitted from the breakdown of the soil around your home's foundation. It creeps into your home through small holes or cracks in the foundation and silently wreaks havoc on lung tissue. Ryan went on to say that radon gas is the second leading cause of lung cancer, claiming 21,000 lives each year in the United States. Going back to the test, Ryan explained to the homeowner that the purpose of this test was to record radon levels in the house over 48 hours, delivering an average result when the test concluded. Ryan went on to say that, should the results come back higher than 4 pCi/L, he would strongly recommend the installation of a radon mitigation system. Ryan explained that a typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. He finished by saying that, when installed by an experienced professional, a radon mitigation system will lower the concentration of radon gas in your interior air to minimal levels recommended by the EPA and other health safety agencies. The homeowner liked Ryan's comprehensive approach and solution, and decided to sign on the spot.  On the day of the installation, our Foreman, Dakota, and his team were able to seamlessly place the system in the home. Now, our customer is thrilled to know that he no longer has to worry about dangerous radon gas!   

Following heavy rainfall, a homeowner in Calmar, IA, knew they needed to inspect their basement for any damage. The homeowner went to the basement and made a startling discovery, several wet spots throughout the basement. Knowing this would only worsen, the homeowner knew they needed to find a lasting solution. Unsure of the cause, the homeowner began looking into basement waterproofing companies near Calmar, IA. Our stellar reviews and ratings immediately caught the homeowner's attention, so they went to our website and signed up for their FREE estimate. Once the estimate was set, we sent one of our Iowa-based Design Specialists, Brady, to the home to begin the estimate appointment. During his investigation, Brady found that several areas in the basement where water was sneaking in. Brady completed the estimate appointment and was able to provide the homeowner with a solution to the issue. After hearing Brady's proposal, the homeowner knew this was their best option, so they agreed. Brady sent the plans to our Office, then they passed the plans along to our Foreman, Juan, and his crew. Once they received the proposal, Juan and his crew traveled to Calmar and began the waterproofing project. First, Juan and his crew started by installing WaterGuard around the perimeter of the basement. Next, the crew took out the old sump pump and replaced it with the SuperSump+. Once the SuperSump+ was secured, the crew dug a feedline to connect the WaterGuard to the new sump. Finally, the crew attached CleanSpace to the unfinished basement walls. Juan and his crew wrapped up the project and left the basement better than they arrived. The homeowner was impressed with the transformation done by the crew. American Waterworks is happy to transform its customer's basements and eliminate any water intrusion issues. 

A homeowner in Waseca, MN, had water leaking into his basement and cracks forming along the walls which concerned him about the potential damage to his home. He quickly began searching for services in the area and came upon American Waterworks through our website. After browsing our Before and After photos of Waterproofing Basements and Foundation Repair, he contacted us to claim his FREE estimate and scheduled a date with one of our experts. Our Design Specialist, Lance S., arrived at the home and conducted a thorough inspection of the basement. He explained that one of the causes of a wet basement is the "clay bowl" effect. When excavated soil is replaced around a completed foundation, it isn't as dense and tightly packed as undisturbed soil further away. As a result, when it rains, water collects in the soil, putting pressure on foundation walls and causing it to crack. Water then forces itself through the cracks into the basement. To address this issue, Lance recommended our GeoLock anchors, CarbonArmor, WaterGuard, TripleSafe Sump Pump, IceGuard, and CleanSpace. The homeowner was happy to proceed, and Lance's design was sent to our Foreman, Diego B.  Our Foreman, Jesus C., and Diego B., and their crew arrived at the home on separate days for the installations. To waterproof the basement, the crew installed 127 feet of WaterGuard. These are placed around the perimeter of the basement by hammering into the floor. Next, rocks are placed in the holes, and the WaterGuard is positioned on the top, connecting to the sump pump. Once set, the concrete is poured back on top of the installation. The TripleSafe sump pump provides three levels of protection for your basement. One pump is installed at the lowest level, capable of discharging 2,200 gallons of water per hour. The second pump is installed a little bit higher to act as a backup if the primary pump fails or is overwhelmed with heavy water. The third pump is installed at the highest level in case of power outages. Additionally, two IceGuards were installed outside the home to eject water away from the foundation. Our IceGuards are designed not to freeze during cold temperatures, unlike traditional discharge lines. The crew also installed CleanSpace, a plastic wall vapor barrier, on the walls to prevent mold growth. In total, they installed a total of 127 feet of CleanSpace. For foundation repair, the crew installed 18 GeoLock wall anchors. The anchors are installed by digging a hole in undisturbed soil several feet away from the foundation. The first GeoLock anchor is placed inside and attached to the interior wall, with both anchors connected by a small steel pole. The GeoLocks permanently stabilize the foundation walls and can be adjusted to straighten the walls over time. Finally, 7 CarbonArmors were installed on the remaining walls. The installation process involves cleaning the walls, applying epoxy, and securing the CarbonArmor straps on top. After everything was installed, the crew cleaned up their equipment and left the home, leaving the homeowner with peace of mind. Now, our customer no longer has to worry about his basement! Are you experiencing similar issues? Click HERE to claim your FREE estimate!

A homeowner in De Soto, WI, knew it was time to repair their water-damaged basement. Knowing they could not repair the issue themselves, the homeowner began looking into "basement waterproofing near me". After comparing several waterproofing companies in their area, the homeowner's eye was only caught by one company, American Waterworks. After seeing our top-of-the-line waterproofing products, the homeowner knew their project would be in the right hands. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Ryan. The following week, Ryan traveled to De Soto to begin the inspection. After he arrived, Ryan introduced himself to the homeowner and began the detailed evaluation. During his inspection, Ryan confirmed that several areas were suffering from water intrusion. To prevent the issue from worsening, Ryan recommended installing several waterproofing products throughout the basement. After hearing Ryan's recommendations, he knew it was their best plan of action. Next, Ryan sent the proposal to our Logisitcs team to build and schedule the project. Once the Logistics team had settled the final details, they assigned their project to our Foreman, Kiko, and his crew. A few weeks later, Kiko and his crew traveled to the home to start the installation. First, Kiko and his crew began by installing WaterGuard around the basement perimeter. Once the WaterGuard was secured, the crew shifted their focus to taking out the old sump pump and replacing it with the TripleSafe sump pump. Finally, the crew completed the project by attaching CleanSpace to the unfinished basement walls. After the products were secured, Kiko and his crew cleaned up their materials and left the home. The homeowner was given peace of mind knowing their basement was properly waterproofed. American Waterworks is glad to provide its customers peace of mind knowing their basements are dry and secure.