Before & After Photos

A homeowner in Milnor, ND, noticed odd sounds from their basement. After further investigation, the homeowner discovered the sounds were coming from their sump pump. Worried about the long-term effects, the homeowners knew they needed to find an expert solution. Unsure who to work with, the homeowner began looking into sump pump replacements and companies that provide those services. During their investigation, the homeowner came across our website. Interested in our waterproofing services, the homeowner was impressed with our elite waterproofing products. Additionally, our Radon Mitigation Systems caught the homeowner's eye. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. After the estimate was set, the homeowner prepared for the arrival of Ian, one of our Design Specialists. Ian made his way to the home and began his thorough investigation of the basement. During his investigation, Ian confirmed the basement required repairs. Additionally, Ian tested the home's radon level and found that it was alarmingly high. Ian recommended installing a Radon Mitigation System to lower the levels. Knowing this was their best option, the homeowner agreed with Ian's recommendations. Next, the plans were passed along to our Logisitcs team to approve the plans. Once the plans were approved, the proposal was assigned to our Radon Sales and Service Technician, Jackson. Jackson received the plans and traveled to Milnor to begin the project. First, Jackson installed additional parts to the struggling sump pump. Next, Jackson shifted his focus to installing the Radon Mitigation System. By installing a Radon Mitigation System, it will lower the concentration of radon gas in your home to the minimal levels recommended by the EPA. Jackson installed the entire system on the inside and outside of the home. Once all the products were secured, Jackson cleaned up his materials and left the home. The homeowner was relieved to know their home's radon levels were lowered and at the proper levels. American Waterworks is happy to provide their homeowners peace of mind knowing their radon risk is eliminated.

Todd M. of Canby, MN had water seeping into his basement, making him feel nervous about water moisture, humidity, mold build-up, and other water damages. He got in contact with our staff at American Waterworks and scheduled a FREE Estimate with our Design Specialist, Jared Bruns. Jared went to his home, carefully inspected his water problems, and came up with a solution that worked for him and his basement waterproofing needs. Todd got all of his questions answered and felt confident in Jared's proposal, so he went ahead with the project. 

Our Foreman, Cole Brinkman, and his production team began the project by breaking out the concrete floor perimeter, forming a waterway trench. In the trench, our team installed our WaterGuard System, which is made to prevent water clogs, collect water seepage from basement walls, and serve as an underground drain. Next, our team installed our CleanSpace Wall Vapor Barrier around the wall perimeter. Our CleanSpace is made to prevent mold and humidity build-up, act as an extra wall protectant, and give the space a neat and clean appearance. To complete the project, Cole and his team filled the open floor gaps with river rock and applied new concrete over it. 

Are you experiencing water leaking into your basement? Call us today or click HERE to schedule your free estimate!  

This concrete patio slab has sunk nearly 3" over time, causing water to pool near the home's foundation and a 3 inch void between the concrete and landscaping block of the attached staircase.  Our Team was able to raise the concrete patio slab over 4 inches with our trusted PolyLEVEL System to allow for proper drainage after it rains and raised the staircase enough to fill the initial void.  

John S. of Worthington, MN had water leaking into his basement and cracked foundation walls, making him feel nervous about water moisture and the structural build of his home. He did some research online and came across American Waterworks. He called our office staff and scheduled a FREE Estimate with our Design Specialist, Eric Hazelton. Eric went to his home, examined the problems, and came up with a solution that fit his home repair needs. John was confident in Eric's proposal, so he went ahead with the project. 

Our Foreman, Juan Pena, and his production team began the project by cutting out the concrete floor perimeter with a jackhammer, forming a trench. In the trench, our team installed our WaterGuard System, which is made to prevent water clogs, serve as an underground drain, and collect water leakage from basement walls. Next, our crew installed our CleanSpace Wall Vapor Barrier, which is made to prevent humidity and mold build-up, cover any holes or divots, and provide the room with a neat and clean appearance. Lastly, Juan and his team installed our foundation repair PowerBraces. Our PowerBraces are made to stabilize failing basement walls and provide the potential to straighten walls over time. PowerBraces can be tightened over time to make bowing or tilting walls straighter and more vertical. To complete the project, our team covered the open floor gaps with rock and replaced the concrete. John was thrilled with the project! 

John S. of Worthington, MN had a bucking foundation wall, causing water to leak through it and make his basement wet. He went online and saw that American Waterworks provides free estimates. He called our office line and scheduled an appointment with our Design Specialist team. Our Design Specialist went to his house, carefully inspected his problems, and drew out a solution that worked for him and his needs. John was comfortable with the proposal and felt confident in our products, so he went ahead with the installation. 

Our Foreman and his production team began the installation by breaking out the concrete floor perimeter with a jackhammer, forming a trench. In the trench, our team installed our WaterGuard System, which prevents water and mud clogs and collects water seepage from basement walls. Next, our team installed our CleanSpace Wall System Vapor Barrier around the wall perimeter, which is made to prevent mold and humidity and acts as an extra wall protectant. Lastly, our Foreman and his crew installed our PowerBraces around the wall perimeter on top of the CleanSpace. Our PowerBraces are made to stabilize failing basement walls, providing the potential to straighten them over time. To complete the installation, our production team filled the open floor gaps with river rock and applied new concrete over them. John was ecstatic with the repairs and had a great experience with our team from start to finish!