Before & After Photos

A homeowner in Rochester, MN, noticed that his settling concrete driveway had caused bumps to form in some areas. Frustrated when he had to drive over them, he decided to have the issue addressed by looking for concrete lifting in the area. The homeowner found us and, after looking into our company, he contacted our Appointment Center to schedule his FREE estimate. 

In about a week, our Design Specialist, Nate B., arrived at the home for the inspection. During the inspection, Nate explained to the homeowner that the likely reason their concrete is sinking is due to soil compaction. When a soil's load-bearing capacity is exceeded, it causes the soil to compact and settle beneath the concrete. As this happens, the concrete slab would move down with it. To fix this issue, Nate recommended PolyLevel, our high-density polyurethane formula that stabilizes and lifts sinking concrete. Its expanding properties would compact the soil and effectively lift the slab without the trouble of mudjacking or complete replacement. After looking over Nate's proposal, the homeowner happily agreed to his recommendations.

In about two weeks, our Foreman, Troy J., and his crew arrived at the home for the installation. The crew began by drilling small holes into the slabs. PolyLevel is then injected beneath the slab. Once the slabs have been lifted to the desired level, the crew seals the holes. Lastly, the crew cleaned up their equipment and left the home.

Now, our customer can have peace of mind with his smooth and level driveway! Have you noticed sunken concrete on your property? Click HERE to schedule your FREE estimate today!

A homeowner in Rochester, MN, had noticed that the slabs along the front of her steps had begun sinking, causing the area to become uneven. Worried about the possible safety risks, the homeowner began searching for concrete repair in Rochester, MN, and found us. After browsing our website and becoming impressed by our reviews, the homeowner decided to contact us and schedule her FREE concrete estimate. 

In less than a week, our Design Specialist, Mitch S., arrived at the home to conduct a thorough inspection. During the inspection, Mitch identified the issue as settling soil. To lift the slabs back to their original position, Mitch recommended our PolyLevel. Along with PolyLevel, he also recommended NexusPro to seal the joints. The homeowner happily agreed and scheduled the installation date.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. The crew drilled pea-sized holes into the concrete slabs and injected PolyLevel. Once the slab had been lifted to the desired height, the holes were sealed, and the crew began sealing the joints with NexusPro.

Now, our customer can have stable and level steps! Experiencing sunken concrete? Click HERE and schedule your FREE estimate today!

In Rochester, MN, a homeowner noticed signs of concrete problems along their driveway and walkway. Knowing that without the right solution, the issue would worsen, the homeowner decided to look into driveway repair in the area. After finding our website and becoming impressed by our reviews, the homeowner contacted us to schedule their FREE estimate. 

In less than a week, our Design Specialist, Brian R., arrived at the home for the inspection. During the inspection, he took a close look at the troubled slabs, determining which needed lifting and leveling. After reporting his findings to the homeowner, he recommended lifting the slabs with PolyLevel and sealing the joints with NexusPro. Knowing the mess that comes with mudjacking, the homeowner happily agreed to Brian's recommendations.

In about a month, our Foreman, Jordan S., and his crew arrived to lift and level the slabs. Once this was completed, the crew applied NexusPro along the joints.

Now, our customer can have a smooth driveway and walkway! Experiencing a sinking sidewalk, stairs, driveway, or porch? Schedule your FREE estimate today by clicking HERE!

A homeowner in Rochester, MN, had noticed that the concrete slabs around their home had begun sinking. Concerned about the safety risks, the homeowner contacted us and scheduled their FREE estimate.

In less than a week, our Design Specialist, Nate C., arrived at the home for the inspection. During the inspection, he took a close look at the troubled concrete slabs and recommended lifting them with PolyLevel, our foam-expanding solution, and NexusPro, our silicone-based sealant to seal off the joints. After reviewing the proposal and becoming confident in our TEAM, the homeowner decided to move forward with the project.

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. Once all the slabs have successfully been lifted and leveled, the crew shifted their attention and applied NexusPro along the joints.

Now, our customer can have peace of mind! Noticed sunken slabs around your home? Click HERE to schedule your FREE estimate today!

In Rochester, MN, a homeowner was experiencing sunken concrete slabs around their home. Concerned that some areas, such as the sidewalk and driveway, have become trip hazards, the homeowner began looking into concrete repair in the area and found us. After browsing our website and becoming highly impressed by our concrete repair photos, the homeowner contacted us to schedule their FREE estimate.

In less than a week, one of our Design Specialists arrived at the home for the inspection. During the inspection, they took precise measurements to see how far the slabs had sunken and determined the areas that needed lifting. To lift the slabs back to their original position, our Design Specialist recommended installing PolyLevel, our foam-expanding solution that is injected beneath the slabs to effectively lift the concrete in minutes. Along with PolyLevel, our silicone-based sealant, NexusPro, was recommended to seal the joints to provide a seamless look. Happy that our product comes with a warranty, the homeowner decided to move forward with the project.

In about a month, our Foreman, Jordan S., and his crew arrived at the home for the installation. The crew began by drilling small holes into the concrete slabs. Then, our crew injects PolyLevel beneath the slabs, filling in gaps in the soil. Once the slabs have been lifted to the desired height, the crew ensures it is level before sealing the holes. Lastly, the crew applied NexusPro along the joints.

Now, our customer can have a smooth sidewalk and driveway! Looking for concrete leveling? Schedule your FREE estimate today by clicking HERE!