Before & After Photos

A section of the driveway at this home in Ballwin, Missouri had settled, creating a sort of speedbump when entering the garage.  Woods Basement Systems leveled the concrete slab with PolyLEVEL (a superior alternative to traditional mudjacking), lifting the slab to be level with the garage slab.  Now, the entry to this garage is a smooth one.

A sunken sidewalk poses a trip hazard and is a liability.  This sidewalk in Ballwin, MO settled and proved to be a nuisance on a daily basis.  Woods Basement Systems installed PolyLEVEL to lift the sunken concrete slab and level out the sidewalk.

Customer, Sam B. of Manchester, Missouri, had unleveled pavement in his driveway, so he decided to call Woods Basement Systems. Upon further inspection, systems design specialist, Ryan K., recommended the installation of PolyLevel.

Foreman, Joshua B. worked on the job. Polylevel is a high-density polyurethane formula or foam that works to permanently lift and stabilize concrete slabs. Small, dime-sized hole are drilled into the pavement and then the polymer is injected into the void. The holes are then covered up with cement and can be used within 15, so there's no unnecessary time to wait for it to settle.

Sam B. can now safely use his driveway. 

A concrete sidewalk in Ellisville, MO was settling, causing the slabs to become uneven. To fix this, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This sidewalk will remain level and stable for years to come!

A driveway in Ballwin, MO was settling, causing cracks to form and the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This driveway will remain level for years to come!