Before & After Photos

Homeowner Mike is anticipating selling his home in a few years and wants to fix a few things. He noticed his floors were sagging and soft. He also noticed his walls and doors were cracking and sticking. After doing research, he realized his home might have a foundation problem. 

Thrasher came out to his home to inspect the problem. Sheldon Sharp, System Design Specialist, found the main beams in Mike's crawlspace were rotted and had settled over time, which explains why the floor was soft and the walls were pulling away from the ceiling.

He brought our install team to the site to work their magic. They installed three I-beam support sections and jacks to support and push up the floor, which will give them more stability.

Mike is happy with the results and loved how professional and communicative we were through the entire process. 

Thrasher was called in to level the sloping floors of this older home. The home was settling on a limestone foundation, making the project especially challenging. To level the floors, we installed our SmartJack XT support system in the basement to restore support to the failing joists, and to prevent the problem from recurring in the future. The homeowner was very happy with the end result, and felt taken care of throughout the process.

This was was near complete failure. The wall in question is a combination of poured concrete and concrete block material. The poured section of the wall was formed horizontally on the inside, and was an "Earth Pour" on the outside, meaning the builder did not use a concrete form outside the home, but rather used the exposed dug up soil as the mold to form the concrete.

We were able to install Everbrace to permanently stabilize the wall and prevent it from moving inward and collapsing. 

This homeowner was gifted this home from his father. He started to notice settlement on the back wall where the crawlspace was added and his floors were also sagging. He called Thrasher to come out and inspect. We found, upon inspection, that the add-on crawlspace was not supported sufficiently when it was built. The span from wall to wall was too wide and needed supports in the middle to help the slab not settle. 

To fix the issue, we used our I-beams to run the length of the crawlspace in smart jacks to support the beam so that the floor would not settle or sag.

The homeowner was very happy he doesn't have to concerned about that area and happy he can continue to live in the home that his father built.

These customers had no idea they had a foundation issue until they wanted to get new windows installed. The window company mentioned that they believed the cracks on the outside of the house indicated something more was going on. We found that the home's foundation was settling and to fix that we installed 13 push piers to the outside of the home.