Before & After Photos

This homeowner contacted us because they had water issues in their basement that they wanted to address before moving.  This person was getting ready to sell their home but did not want to leave the future owner with future problems. That’s when our crew at The Basement Transformer stepped in to make things right. To help get this house water free we had to install our TripleSafe Sump Pump System. There was water coming up through the middle and the perimeter of the porous concrete floor, but thanks to the TripleSafe that nightmare would end. This impressive and one-of-a-kind system is capable of discharging thousands of gallons of water thanks to its cast-iron Zoller horsepower sump pumps. The primary pump set at 1/3 horsepower can discharge up to 2,220 gallons of water, while the secondary pump set at 1/2 horsepower can discharge up to 3,900 additional gallons. Even if you experience a tripped circuit or a power outage, the UltraSump battery backup sump pump will still stop a flood in its tracks. When set at the highest level, this device can discharge up to 11,500 gallons or more of water! We made sure to install the entire system in this homeowner’s basement to prevent water from entering and damaging the area. The concrete floor was also restored after the installation of the sump pump was complete. Once our crew was done, the homeowner knew they could move and sell their home with no issues. 

In Millbrook, NY, a homeowner needed us to insulate their basement walls and clean up their overall appearance. Our team used our Basement to Beautiful Insulated Wall Panels to solve this problem. These panels help homeowners save on heating costs and create a healthier & more comfortable environment in the basement. 

The Basement to Beautiful panels are designed with SilverGlo insulation. 

The SilverGlo is created using a special graphite infusion process that increases its capability to insulate a space by 24%. This system is made to attach directly to your walls using metal studs, creating two inches of uninterrupted insulation behind them. This helps the thermal blanket on your basement walls to remain completely uncompromised and avoids any transfer of heat to the original walls underneath. These panels are also made with inorganic materials, so mold and mildew are unable to grow on them. 

When our installation was complete, this homeowner knew they had a great system in place that would keep their basement insulated at all times. 

This homeowner in Unionville, NY needed a waterproof job done on the crawlspace and basement portions of their home. The old stone walls had clear signs of damage, as peeling and chipping were clearly visible. The floor needed to be cleaned up as well. Overall, the space was run down and looked deteriorated. Our team stepped in to solve the problem by installing both our CleanSpace Wall System and our CleanSpace Encapsulation System. Although slightly different, both serve the same purpose – to act as a water barrier that keeps moisture out! Our drainage matting was also installed underneath the encapsulation liner to create a permanent seal on the floor, blocking water from getting inside. With this space completely transformed, humidity issues were no longer a concern for this homeowner. Contact us today for a free estimate, so we can do the same for you! 

This basement in Sparrow Bush, NY was having issues with water intrusion and humidity. In order to tackle these problems, our WaterGuard System, TripleSafe Sump Pump System, BrightWall panels, and SaniDry Sedona dehumidifier were installed. All these products work together to make sure that water stays out and away from the home. The BrightWall panels help channel the water directly into the WaterGuard System, which then drains the water into the TripleSafe Sump Pump System to be discharged. The SaniDry Sedona dehumidifier removes up to 100 pints of water from the air per day, leaving the air nice and dry!

Before and after we installed our TripleSafe sump pump system in this basement.