Before & After Photos

Dave H. was looking to level the sidewalk in front of his home. The sidewalk had multiple uneven slabs and a few cracks that were caused from the settling concrete. We installed the effective PolyLevel system that used specialized polymers to lift and level the settled slabs. We also used NexusPro joint sealant to caulk the cracks, which prevented them from continuing to shift over time.

This Okemos homeowner had a driveway with about half of the slabs are sinking. It causes some issues with driving and walking due to the unevenness. We decided to use PolyLevel to raise the slabs sunken concrete slabs back to the original position. PolyLevel is a light weight injectable foam that is waterproof so it won't wash away. It also cures in about 15 minutes so it won't be inconvenient to the homeowners.

The sidewalk to the homes front door has sunk about 2 inches in a couple different spots. They have used us to level concrete before and knew we could fix the uneven trip hazard. We used PolyLevel to raise the fallen concrete back to the original level. PolyLevel is a light weight but very strong foam that is injected under the concrete. It is waterproof and stable so it won't wash away or react with the soils. The best part is that is cures in such a short amount time that it will not disturb that homeowners.

Pam was experiencing an unlevel entrance to her home. The sunken concrete and stairway was not only unsightly, but created a tripping hazard for visiting guests. Once injecting our PolyLevel® foam into the sunken concrete slabs and stairway, the entrance was once again level and the porch stair was no longer slanted. In addition we installed NexusPro into the joints and cracks of the sidewalk to help seal the newly raised slabs and prevent water and debris from degrading it from below again. Pam now has a safe entrance for those entering through the front of her home.

Brian H. noticed some cracks in his garage. Unfortunately, the slab outside of his garage was beginning to sink.  We used PolyLevel to raise the slab. It has a lifting force that ranges from 2,000 to 4,000 pound per square foot.  PolyLevel requires fewer holes than mudjacking, has a quick cure time, is waterproof, and environmentally friendly.