Before & After Photos

This all electric house in Newark Valley, NY had some insulation by way of fiberglass blankets on the poured concrete foundation walls. This was causing moisture to get trapped behind the fiberglass. 

We proposed to tear down the fiberglass blanket covering the foundation walls and spray foam instead. The rim joists were also empty. We sprayed 2 inches of our Closed Cell Spray Foam in the rim joists, as well as on the walls of the foundation. 

This homeowner in Newark Valley, NY was part of a group in a mobile home park we were working on helping through the NYSERDA program. The NYSERDA program offers free insulation upgrades and energy and fuel reduction costs to low to moderate income families. 

The underbelly of this home had the original fiberglass insulation fall down over time, which left this homeowner quite cold in the winter. We sprayed 3 inches of our Closed Cell Spray Foam to the underside of the mobile home to create a seal that would disallow the cold winter air to come up through the floors of the mobile home and make the floors unbearably cold.

This mobile home in Newark Valley, NY had fiberglass batts of insulation put up on the underside of his home. However, many of the insulation batts were not touching the floor, therefore not installed correctly. 

We removed the inadequate fiberglass batts and sprayed 3 inches of our closed cell spray foam to the underside of the mobile home. 

This Newark Valley, NY mobile home owner was tired of dealing with overwhelming heat in the summer in her home. We wanted to make her more comfortable in her home, so we proposed to change that for her.

We sprayed 2 inches of our Closed Cell Spray Foam to the underside of the mobile home. This will prevent the hot summer air from outside from being able to get inside, and leaving the homeowner uncomfortable in her home.

This homeowner in Newark Valley, NY wanted to get some insulation added to her home, as the only insulation was a very small amount in the attic flooring. We proposed to dense pack the exterior walls of the home to add insulation to make this homeowner more comfortable in her home. 

We removed the vinyl siding from the home carefully, drilled the holes for our hoses to get into the wall cavities, and then inserted our cellulose hose into the hole to dense pack the walls of the home with our cellulose insulation. Once the holes are densely packed, we plugged the holes with cedar wood plugs, sealed them and once complete we replace the siding as carefully as it was removed.