Before & After Photos

This Glendale home had a large interior slab crack.

We cut stitches into your cracked foundation's concrete, drop carbon fiber laminates into the cuts and adhere with low viscosity polyurea. This system is stronger, faster and more cost-effective than the more traditional embedment of rebar dowels into the concrete. Crack Stitching is a reliable way to repair concrete & foundation cracks running along your floor.

In Glendale, Arizona, a homeowner faced significant issues with their pool deck. The concrete slabs had settled unevenly, creating dangerous tripping hazards around the pool area. Cracks had formed in the concrete, allowing moisture to seep beneath and further destabilize the soil, causing additional damage. The homeowner contacted Arizona Foundation Solutions for a comprehensive repair solution. Gamalier, the project foreman, oversaw the entire process, while Amanda, the customer care representative, ensured smooth scheduling and communication. Greg, the design specialist, evaluated the situation and recommended the use of PolyLevel® and NexusPro for the repair.

After the evaluation, the team from Arizona Foundation Solutions got to work. Greg, the design specialist, recommended PolyLevel® for lifting and leveling the settled slabs and NexusPro for sealing the cracks. The process began with the injection of PolyLevel® foam beneath the sunken slabs. This foam expanded to fill the voids and lift the concrete back to its original level, stabilizing the soil beneath. The quick-curing properties of PolyLevel® allowed the homeowner to use their pool deck within just 30 minutes of completion.

Next, the team addressed the cracks in the concrete using NexusPro. This silicone-based sealant was expertly applied to the prepared cracks and control joints. The NexusPro sealant, resistant to UV rays and extreme temperatures, ensured long-lasting protection against further damage. Within 60 minutes, the sealant had cured, providing a durable and aesthetically pleasing finish.

Thanks to the efforts of Gamalier, Amanda, and Greg, the homeowner in Glendale now enjoys a safe, level pool deck free from tripping hazards and unsightly cracks. The innovative use of PolyLevel® and NexusPro not only restored the concrete surfaces but also provided a long-term solution to prevent future problems.

In Glendale, AZ, a homeowner noticed horizontal fissures widening along a 5 ft section of their stem wall, directly beneath a sliding window. Each morning revealed new paint chips on the concrete slab and small fragments of CMU aggregate where the parge coat had spalled away. Frustration mounted as drafts crept through the cracks, and anxiety over property value crept in with every visible gap. Daily life was disrupted by the constant worry that an unstable foundation could lead to larger structural failures—and larger repair bills.

2. The Search for a Solution

After attempting a DIY epoxy injection kit found online, the homeowner watched as the crack reappeared within weeks. A generic contractor patched the surface with polymer-based fill, but the repair failed less than two years later. Research revealed that stem wall repair isn’t just cosmetic—it demands specialized diagnostics, engineering expertise, and a warranty that guarantees long-term performance.

3. Why Arizona Foundation Solutions?

A neighbor’s five-star review led the homeowner to Arizona Foundation Solutions. The promise of a free, no-pressure inspection stood out. During the on-site evaluation, an AZFS specialist deployed a laser level to confirm uneven settlement and a moisture probe to detect chloride ion penetration. In clear, jargon-free terms, the specialist explained how rusting rebar—fed by migrating chloride ions—was the true culprit behind the recurring cracks. That transparent approach built trust before any work began.

4. The Repair Process

Solution chosen: 5 ft Stem Wall Patch + 2 Concrete Removal & Replacement (R&R) + 1 Moisture-blocking Application (MOB)

Set-up – The crew erected safety barriers and tarps to protect the landscape and window.

Install – They removed the damaged parge coat and fractured rock to expose the rusted rebar. Sandblasting restored the steel to a pristine condition, then an ion-blocking epoxy coating sealed the rebar against future chloride attack. Technicians applied anodic-based repair mortar to rebuild the stem wall segment, followed by two precise R&R sections on the adjacent slab joints. Finally, a moisture-blocking polymer membrane (MOB) was installed at the slab-wall interface.

Verify – Laser readings confirmed the wall was perfectly aligned, and cure-time checks ensured the mortar reached full strength. The entire process took less than two days and left the yard and utility access undisturbed.

5. Transformation – The After

Before: Jagged, ½ in-deep spalls 2 in below the window sill; chronic drafts; water stains on the slab; a loose control joint crack leading directly into the foundation.

After: A seamless, 36 in × 4 in patch with smooth trowel finish; walls true within ± ⅛ in; no visible gaps or water intrusion points. Doors close without binding, and drafts have vanished. The homeowner now reports increased confidence in their home’s structural integrity—backed by a transferable, 25-year warranty and clear documentation of chloride mitigation steps.

6. Emotional Engine – Why Act Early?

Ignoring even hairline cracks allows moisture and soil shifts to exacerbate rusting and concrete decay. Industry data shows repair costs can escalate by up to 50 % when corrosion is left unchecked for over a year. Arizona Foundation Solutions combats surprise fees by offering transparent pricing, certified crews, and lifetime service policies—ensuring small symptoms don’t spiral into major headaches.

7. New Era – A Win for Everyone

By addressing the stem wall at its root cause, the homeowner’s property appraisal increased by an estimated $8,000. Neighbors in Glendale, AZ 85304 noticed the clean, professional site and have since booked free inspections themselves. Arizona Foundation Solutions continues to safeguard homes across the Valley, reinforcing community property values and peace of mind.

A single-family residence built in 1973 down in Glendale was facing some concrete crack problems. The Homeowners were remodeling so decided to repair the floor since they were investing in the house, so, they decided to fix the concrete crack. The Homeowner called Arizona Foundation Solutions to go and visit the owners to see the problem. The concrete repair experts concluded that the best solution for the problem would be to do some concrete crack stitches.

This impressive before and after photo set showcases a professional stem wall repair completed at a residential home in Glendale, AZ. The original stem wall was severely cracked and deteriorating due to moisture intrusion and rusting rebar — a common issue for concrete foundations in Arizona’s arid desert climate.

Our crew carefully removed the damaged sections, treated and replaced the corroded steel, and rebuilt the stem wall using non-corrosive fiberglass rebar and specialized patching materials designed to withstand harsh Arizona conditions. The result is a durable, reinforced stem wall that not only restores structural stability but also improves the appearance and value of the home.

✔️ Stops future cracking and spalling
✔️ Reinforced with rust-resistant fiberglass rebar
✔️ Blends seamlessly with existing concrete
✔️ Engineered for Arizona's expansive soil and dry climate

If you're seeing cracks or flaking concrete at the base of your home’s exterior walls, it could be a failing stem wall. Don’t wait — protect your home’s foundation with expert stem wall repair in Glendale, AZ.