Before & After Photos

Pathways to the front door see a lot of foot traffic and it can be dangerous if the cement is unlevel. This sidewalk could be a tripping hazard, it's not very appealing and it can pool water especially in those cold winter months with all the snow. 

We used PolyLevel to inject structural grade polymers beneath the cement which will lift it back up to its desired height. PolyLevel cures quickly and can be driven on about 15 minutes after the material cures. The material is also waterproof so there's no worries that it will wash out. 

Keith has a sinking front porch that he is worried about. The porch has support beams for a roof over it and the angle that the concrete is settling could cause issues with the roof. We used an injectable foam called PolyLevel to lift the sinking part of the concrete back up. This will give the homeowner peace of mind that the porch and roof are stabilized.

Paul's front sidewalk had settled about three inches so he called our team for assistance. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

John's driveway needed to be lifted because it was sloping towards the garage. This was causing a gap between the concrete driveway and garage. So he called our team and we installed PolyLevel. PolyLevel is a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Brian needed help leveling his concrete sidewalk that leads up to his house. So he called our team and we installed PolyLevel. PolyLevel is a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.