Before & After Photos

This new homeowner in Amherst, New Hampshire, moved into their home in late April. During the inspection, the radon levels were tested and they averaged around 11 pCi/L. The homeowner decided to call EFS to have us install a radon mitigation system into their new home. Our Design Specialist Isaac Hernandez met with the homeowners and designed a radon mitigation system for the home to lower the radon levels. 

Our Installation team led by Dillon Kingsbury, began installing the system by first creating an extraction point in the basement and then feeding PVC pipe to the exterior of the home where we installed the radon fan and vented the system above the roofline of the home. 

The owner of a century-old house in Berlin, Massachusetts, had concerns about radon levels and sought help from EFS. After conducting an inspection, our Design Specialist Liam FitzPatrick suggested installing a radon mitigation system, Drainage Matting, and CleanSpace to lower the levels inside the house.

This homeowner in Concord, New Hampshire was experiencing higher than normal radon levels in their home. The home was tested with a CRM machine by Design Specialist Paul Magowan. The results of the test came back at 3.8 pCi/L. Crew Lead Branden Edwards and his team came to the home and installed a radon system.

A resident in Pepperell, Massachusetts, discovered a medical condition that prompted them to seek the installation of a radon mitigation system in their dwelling. They contacted EFS to conduct a radon test, which revealed an average level of around 9 pCi/L that needed to be reduced. To address this, our Design Specialist Jared Pavluvcik suggested a radon mitigation system with two extraction points, which we promptly installed. Thanks to our team's efforts, the radon levels in the home were successfully lowered to a safe level.

This homeowner had concerns with high radon levels and a high water table. Our team installed a radon mitigation system, as well as a sump pump with battery backup.