Before & After Photos

This Kentucky driveway was sinking and becoming uneven. Our team raised it back to level with PolyLevel. PolyLevel provides a fast and high-strength solution. In fact, PolyLevel is so strong that it can be used to repair roads, bridges, railroads, and airport runways.

In Kings Mills, Ohio, this homeowner’s driveway had uneven slabs where four sections met. The top right slab sat higher than the others, and the control joints had broken apart, allowing water to seep underneath. Over time, freeze-thaw cycles caused the slabs to separate even more, and a small crack had formed in the upper left section. We repaired the driveway by injecting PolyLevel to lift and level the slabs, then sealed the joints and crack with NexusPro to prevent future water intrusion and protect the concrete from further damage.

The soil underneath this poolside concrete in Loveland, OH, was washing out. This was causing the concrete to slope too far down and away from the pool, leaving slight gaps in the mortar joints. After we leveled out all the slabs using PolyLevel foam, we then sealed the joints using our NexusPro joint sealant. This sealant will make sure water, chlorine, dirt, and other types of debris wont infiltrate underneath the slabs. The sealant is also UV-resistant, which is perfect for areas that receive a lot of sun. There's no doubt that this poolside concrete will last a much longer time. 

This sidewalk in Loveland, OH, had sunk and cracked, creating uneven sections that were both unsightly and unsafe. Using our PolyLevel system, we carefully lifted the settled concrete back to its proper height, restoring a smooth and level surface. We then sealed the cracks and joints with NexusPro to protect against future water intrusion and soil washout. Be sure to scroll through the photos to see how clean and even the sidewalk looks after the repair.

The soil beneath this driveway in Maineville, OH, had settled over time, causing the concrete slabs to sink and crack unevenly. These gaps not only created tripping hazards but also made driving over the surface rough and uneven. To fix the problem, we lifted and leveled the slabs using our PolyLevel system, an expansive foam that’s stronger, lighter, and cleaner than traditional mudjacking. After leveling, we sealed all the joints with our durable, UV-resistant NexusPro sealant to protect against future damage. The result is a smooth, stable driveway that looks great and will stay that way for years to come.