Before & After Photos

This home in Mineral had a sidewalk that was sinking and cracking, becoming an eyesore.

Our System Designer, Scott Llewellyn, went out and determined that our PolyLevel Injection System would be able to life the concrete back up to it's original position.

The foreman for this, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.

This homeowner in Mineral reached out to Fortress Foundation Solutions because their concrete driveway and sidewalk had started settling, causing it to crack and becoming an eye sore.

Fortress went out and used our PolyLevel Injection System to lift that concrete back up to it's original position. NexusPro Crack Repair was used to seal all joints and cracks.

In Mineral, VA, a homeowner faced the unsettling problem of uneven concrete in their driveway, causing both safety concerns and aesthetic issues, as seen in the 'before' photo. Seeking a reliable solution, they turned to Fortress Foundation Solutions. We expertly addressed this issue by using our advanced PolyLevel system. By drilling pea-sized holes and precisely injecting high-strength polyurethane foam, we effectively lifted and leveled the concrete slab. The 'after' photo showcases the transformative result of our intervention with a stable, even surface, exemplifying our commitment to delivering quality concrete repair services.

This garage in Warrenton had a sunken corner with giant cracks. Fortress was able to take care of this issue by using the PolyLevel Injection System to raise and level the corner.

The garage of this home in Warrenton had badly sunken and cracked, and really needed our help!

Our System Designer, Zach Bullock, went out to assess the garage and determined that our PolyLevel Injection system would be able to lift that concrete up.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.