Before & After Photos

Our repeat customer Barbara of Rochester, MN contacted Complete Basement Systems to waterproof a new home of hers.  Our installation team installed a WaterGuard drainage system to collect any ground water seepage coming into the basement and then works to the newly installed SuperSump pump system.  

This homeowner in Rochester, MN was dealing with old, leaking basement windows that had seen better days. The frames were worn, and moisture found its way inside, especially during heavy rains and snowmelt. Not only did this cause dampness and musty odors, but it also affected the overall comfort of the basement space. She wanted a long-term solution that would keep water out and make the basement look brighter and cleaner.

Our team replaced the old, damaged windows with brand-new EverLast Basement Windows. These durable, energy-efficient windows are designed to never rot, rust, or need painting, and they create a tight, waterproof seal to keep moisture where it belongs: outside.

This basement wall showed clear signs of water damage. The concrete blocks had dark stains, efflorescence, and visible cracks from years of moisture seeping through. The space felt damp and uninviting, and the homeowner knew the problem would only get worse without the right solution.

What a difference! Our team installed the CleanSpace Wall System, creating a clean, bright, and moisture-resistant surface. The vapor barrier not only gives the basement a fresh, finished look, it also helps prevent future water intrusion, keeping the area dry and protected for years to come.

The Gariepy home in Cambridge got the works done on their basement. We installed a WaterGuard, TripleSafe Sump Pump, CleanSpace Crawlspace Encapsulation, and more! In the before photo you can clearly see the bottom of the concrete wall is leaky and damp. After, you will see our TripleSafe Sump Pump that was installed as well as where the WaterGuard runs with the new concrete beginning to cure on top.

This Lake Elmo homeowner updated his sump pump just in time for Spring! His old pump had failed so it was time to upgrade. Our top-of-the-line TripleSafe pump was installed. This is a three pump system. Pump 1 is the M-63 which is a 1/3hp cast iron pump that does most of the work. The 2nd pump is the M-98. This is a 1/2 hp that will kick in if Pump 1 fails. This is a larger pump that gives that "turbo boost" when you need it. Pump 3 is a battery back up system. This is a DC operated pump that will kick in if there is a power failure. This is the most reliable pumping system, keeping your basement dry with triple the protection.