Before & After Photos

Crawlspace would flood with a high humidity level. 

We added a drainage system to control the water with a sump pump and a battery backup pump. 

After the drainage system was added, we did a vapour barrier system and insulation to control the humidity level.

This project focused on strengthening and stabilizing a foundation crack. Reinforcement stitches were installed along the crack at regular intervals to help secure the area and prevent further movement.

A high-strength fiber reinforcement with epoxy was then applied over the crack to create a durable, structural repair.

This solution helps restore the integrity of the foundation, prevent future cracking, and provide long-term stability for the home.

To stop water from coming through a foundation crack, we injected it with a high-pressure polyurethane resin. This creates a flexible seal that moves with the foundation and keeps water out. Then, we reinforced the area with a strong carbon fiber weave and epoxy to add long-lasting structural support. 

In this project, we started by sealing up some foundation cracks to prevent water from getting into the home. After making sure the area was clean and smooth, we tested it from the outside with water to confirm everything was sealed properly. We also cleaned the space thoroughly, removing debris and vacuuming it. 

Next, we installed a new drainage system under the concrete floor. We dug a trench, placed a pipe to carry water away from the home, and then poured new concrete to close it back up, leaving the area neat and secure.

We also installed a new pump system to help remove any water that might collect under the home. It includes an alarm to alert the homeowner of high water levels.

To wrap up the job, we sealed the crawl space with a heavy-duty moisture barrier, going partway up the walls. This helps control humidity, improves air quality inside the home, and protects the overall structure.

This project was all about protecting the home from basement flooding and giving the homeowners peace of mind. A new primary sump pump system was installed to efficiently collect and remove groundwater, helping keep the basement dry during heavy rain or rising water conditions. The system includes a sealed cover and an alarm to alert homeowners if water levels increase.

To provide extra protection, a battery backup pump system was also installed. This ensures the sump pump continues working even during power outages, one of the most common times for flooding to occur. With built-in alarms and long-term warranty coverage, this setup offers reliable, around-the-clock protection and helps safeguard the home from unexpected water damage.