Before & After Photos

When a homeowner noticed a musty smell and excess moisture in their crawl space, they knew it was time for a solution. Worried about potential mould and damage, they reached out to us for help. We installed a dehumidifier to keep humidity in check and treated the wood surfaces with a mould prevention solution. To ensure proper drainage, we added a condensate pump. For better insulation and energy efficiency, we installed moisture resistant foam board. Finally, we encapsulated the space with a durable vapor barrier and drainage matting to lock out moisture for good. Now, their crawl space is dry, fresh, and protected, giving them peace of mind and a healthier home.

We turned this crawl space into a much cleaner, drier, and healthier part of the home. First, we gave it a good clean, removing debris, dust, and cobwebs, then sealed and insulated it to help keep moisture out. We added protective layers to the floor and walls, installed a system to manage humidity and air quality, and treated the wood to prevent mold. Everything was neatly connected to the existing drain system. Now, this space is fresh, protected, and ready to support a healthier home environment.

For this project, the goal was to turn a damp and unprotected crawl space into a dry, clean, and energy-efficient area.

We started by sealing the entire crawl space using a strong moisture barrier that covers the floor and part of the walls. This helps keep out dampness and improves the overall air quality in the home. A special layer was also added underneath to help water drain properly and to make the floor more comfortable and durable, especially helpful if the homeowner wants to use the space for storage.

We also repaired a crack in the foundation wall to stop any water from leaking in and to make sure the structure stays solid. This repair is backed by a 5-year warranty for added peace of mind.

To finish the job, we added insulation around the top edges of the crawl space to help keep the home warmer in winter and cooler in summer.

Overall, the space is now dry, stronger, and better protected making it a safer and healthier part of the home.

This project was all about making the crawl space cleaner, healthier, and better protected. We started by wiping down the heating ducts and sewer lines, clearing out spider webs, and removing any loose debris. All wood surfaces were treated with a mould-control solution to ensure the space stays fresh and safe.

Next, we installed a full encapsulation system with drainage matting underneath to help keep moisture out and create a smooth, durable surface. To maintain healthy humidity levels year-round, we added a high-quality dehumidifier/air purifier, which drains to the outside of the home. A dedicated electrical outlet was required to support the new system.

Together, these improvements help keep the crawl space dry, clean, and protected.

This crawl space had a few serious issues, from water leaks and damaged wood to poor air quality. We started by installing a dependable sump pump system with a battery backup, so it can keep working even if the power goes out. Then, we repaired a crack in the foundation and replaced rotten wood, making sure everything is sealed tight and safe.

To keep moisture out for good, we fully sealed and lined the space, added drainage matting for extra protection and comfort, and treated the wood to stop mould in its tracks.

We also installed insulation on the walls to help keep the home more energy-efficient. Now, this crawl space is clean, dry, and ready to support a healthier, more comfortable home.