Before & After Photos

A  crawlspace was not properly insulated in Kirkwood, MO, and water was seeping into it. To solve these issues, SilverGlo Insulation was first installed. This features a radiant barrier infused with graphite, so the heat is reflected into the crawlspace, saving energy. Next, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and allow one to see inside easily. Thanks to these systems, this crawlspace will remain warm and dry for years to come!

Homeowners in Saint Louis, MO wanted to insulate and encapsulate the crawlspace, so SilverGlo Insulation Panels were first installed. This features a radiant barrier infused with graphite, so the heat is reflected into the crawlspace, saving energy. Next, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and allow one to see inside easily. Thanks to these systems, this crawlspace will remain warm and dry for years to come!

A basement wall in Kirkwood, Missouri was leaking water and needed immediate attention. Woods came in and first installed a CleanSpace System to seal the wall and trap any water seeping through. Next they installed a WaterGuard System, which catches the water trapped by the CleanSpace. This system sits right underneath the pavement and above the soil. Because of this, the piping will never get clogged by debris. Thanks to Woods this basement will remain water damage-free for years to come.

Karen H. of Saint Louis, MO had a very wet crawl space. High humidity in the crawl space had caused metal beams to rust and threatened to rot the wood floor joists so Karen called Woods Basement Systems. Woods recommended a crawl space encapsulation system.

Woods installed the SaniDry dehumidifier as part of that encapsulation system. The SaniDry can remove 109 pints of water from crawl space air using the same amount of electricity as smaller household units. It keeps relative humidity low to prevent rot and rust as well as make conditions inhospitable for mold growth and pests.

Karen H., St. Louis, Missouri homeowner, was troubled by her wet, moldy crawl space. System Design Specialist Mike T. designed a solution to keep water and mold out of her crawl space.

Foreman Adam A. and his crew installed CleanSpace to encapsulate her crawl space. CleanSpace is an inorganic vapor barrier that prevents water from entering the the crawl space. In addition to CleanSpace, SaniDry was installed. SaniDry is an energy-efficient dehumidifier. Keeping the humidity low, keeps the mold away.