Before & After Photos

This poured foundation wall in this Vanceburg, KY basement was leaking due to hydrostatic pressure building up outside the wall. We repaired the crack using our FlexiSpan system. First, we cleaned and prepped the crack, chipping out any loose material if necessary. Next, we applied a flexible sealant directly into the crack to form the primary seal. Then, we placed a strip of flexible, open-cell foam over the sealant, followed by an impermeable membrane to permanently seal the repair. The bottom of this system is directed into the drainage system below the floor, ensuring that any future seepage is captured and drained away instead of entering the basement. We then added our BrightWall crack cover over the stained wall. The result was a clean, dry basement wall that the homeowner could confidently finish again.

This homeowner's garage was very moldy and leaked often. With plans of remodeling ir, they knew they had to waterproof their garage once and for all. With this, comes our triple threat plan consisting of our Waterguard drains, our Super Pump, and our SaniDry Sedona dehumidifier. Now our customer is able to think freely on how they want to use their new space.

This basement was leaking water. We fixed it with WaterGuard and a TripleSafe. 

This front porch along with the rest of the driveway and sidewalk had sunken into the ground. The homeowner did not want this beautiful concrete to crack from sinking too far, so we set out to fix it. We injected the driveway, front porch step, and the sidewalk with PolyLevel foam. Using a calculated amount, we were able to raise everything back to where it was original set. 

This customer was interested in insulation and mold control. After we waterproofed the basement, we began to insulate by spraying foam on the band boards and installing Foamax insulation wall panels. The wall panels will help guide water to the system and they will never grow mold due to their inorganic nature.