Before & After Photos

This 3 foot tall crawlspace was holding moisture and standing water causing hard wood floors to buckle inside the home. The homeowner was googling solutions and found our company. Corey Becker performed the estimate and was able to design a permanent solution to keep their crawl space clean and dry. Mike and his crew installed the encapsulation quickly and efficiently, leaving the home in better shape than we found it!

This home owner realized they needed our help when the floors started buckling. We were able to help them by installing a vapor barrier, wall curtains, column wraps, a dehumidifier, and sump pump. This created a clean space that will help the owners floors lay back down and keep from buckling ever again.

This home was experiencing severe moisture issues in the crawlspace causing mold and musty smells. Andrew Gallagher inspected the home and found the wood to be holding 15-60% moisture along the joists. This is dangerous because it will cause toxic mold and rot to from on the wooden foundation. It especially thrives in a damp, dark atmosphere, like under your house. Before this issue got worse, our team came in and totally dried and cleaned out the crawlspace. We installed our sump pump in the lowest spot to collect the ground water, then put our vapor barrier CleanSpace liner in and up the walls, and finally connected our dehumidifier to the system to get the air fresh and clean. Our system totally regulates the crawlspace humidity and moisture content, keeping the home stable, dry, and clean for years and years to come. 

This cusotmer had a vapor barrier laid before we got here and as you can see it has moved around and it not doing it's job properly. We came in and did a full encapsulation making sure that this barrier would never move! 

Due to the uneven ground in this crawlspace there was a lot of standing water. We were able to encapsulate the crawlspace to make sure that the water was removed from the crawlspace and moved outside the home.